LACKEY POWER SYSTEM 40DC 2000X

LACKEY POWER SYSTEM 40DC 2000X

THE LACKEY SYSTEM IS DESIGNED FOR THE END USER REQUIRING MAXIMUM POWER REQUIREMENTS ALONG WITH DC CHARGING ABILITY AND 240V INVERTER POWER • INCLUDES EN1120X PURE SINE WAVE INVERTER, EN3DC40+ DC-DC CHARGER & 60A LOW BATTERY CUT OUT • 5 YEAR WARRANTY


Brand: Enerdrive

Reference No. K-LACKEY-02

0

3,829.00Incl

3,480.91Excl
3829.0AUD
Add to Cart

Need power onsite? Get The Lackey to do it:


Designed around Enerdrive’s proven workhorses the DC2DC 40+ Charger  and our 2000W AC Transfer Inverter, the Lackey is built into a super tough Aluminium and Powder Coated Box. Designed as a pure “Plug & Play” system for the Tradie wanting power wherever they are.

Simply bolt into place using the multiple mounting holes, which includes floor mounting plates. Then plug in your Battery, Solar Panels and Vehicle via the supplied Anderson plugs and it’s ready to go. Programming and monitoring  is done via the DC40+ screen, almost eliminating the need to access inside the box ever. All DC fusing is also taken care of by installed resettable Circuit breakers.

With an additional 12V Output Anderson plug which can be wired to an accessory panel for extra DC loads, every box has been ticked. There’s even an Ignition Sense Plug pre-wired for connection to vehicles with  smart alternators.

The Lackey is built into a unique compact box arrangement and designed to mount on either the front or rear bulkheads of the vehicles canopy or on the inside of the roof for that matter. The system is available in either passenger side or drivers side installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.

The Lackey is quite simply, a Super Tough, Super Compact and Super Simple  Solution with all the power you will ever need onsite, that weekend getaway or wherever the road takes you. All the power you need without any of the fuss put into a small package which will fit just about anywhere.

Need a power system that will work hard for you so you can about your business, then get the Lackey on the job.


More information for products included:

EN3DC40+

EN1120X


The Lackey Features:

- Enerdrives ePOWER DC2DC 40+ Charger (with inbuilt MPPT Solar Controller)

- Enerdrive 2000W AC Transfer Inverter with Inbuilt RCD Safety Switch

- 2x Cigarette/Accessory Socket Outputs

- 2x Dual USB 2.4A

- Low Battery Cutout DC Loads 60A to avoid flattening your battery

- All Circuit Breakers

- Ignition Input for Smart Alternator Equipped Vehicles 

- 175A Anderson Plug for Battery Input

 

*Please note, these are made to order. Lead time is 2-4 weeks approx.



 
 

EN3DC40+

Model

EN3DC40+

Ouput Rating

Output Voltage

12V Nominal (8.0V min)

Output Current (Maximum)

40A – 50A

Output power

775W

Charger DC Output (CH1):

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program

Charger Voltage Range

13.8V – 15.5V

Float Voltage Range

13.0V – 13.8V

Charger Current (User Selectable)

5/10/15/20/25/30/35/40/45/50A (default 40A)

Equalize Voltage (flooded Battery)

15.5V

Equalize Charging Current

10% of Bulk Current Setting

Charging Control

2 stage / 3 stage selectable (Default 3 stage)

DC Output Bank

Single

Current draw from CH1 when in use

= < 50mA

Battery Temperature Setting

Low/ Normal/ High (Battery Temperature Sensor Standard)

Efficiency

95%

Input Rating (CH2 – MPPT Solar)

Input Voltage

14.5 – 45VOC

Maximum Input

≤23 input, 500W (600W allowable) ≥37.5-45V input, 750W (800W allowable)

Input Rating (CH3 – Start/Alternator)

Input Voltage

10.5 – 16VDC / 21 – 32DC

Dimensions

Height x Width x Depth

242mm x 172mm x 74mm

Unit Weight

1.85 Kg

Shipping Weight

2.17 Kg


EN1120S-X

Model – Description

EN1120X

EN1120X-24v

EN1126X

AC Output Power

2000W

2000W

2600W

AC Output Current

8.7A

8.7A

11.3A

AC Output Voltage

230 Vac / 50 Hz

AC Output Waveform

Sinewave (<3% THD)

Nominal DC Input Voltage

12.5 VDC

No Load battery draw

< 1.5 ADC

DC Input Voltage operating range

10.5 – 15.5 VDC

21.0 – 31.0 VDC

10.5 – 15.5 VDC

Under Voltage Alarm

11.0 / 12.1 VDC

22.0 / 24.2 VDC

11.0 / 12.1 VDC

Under Voltage Alarm Recovery

11.3 / 12.3 VDC

22.6 / 24.6 VDC

11.3 / 12.3 VDC

Under Voltage Shutdown

10.5 / 11.8 VDC

21.0 / 23.6 VDC

10.5 / 11.8 VDC

Under Voltage Shutdown Recovery

12.0 / 12.6 VDC

24.0 / 25.2 VDC

12.0 / 12.6 VDC

Over Voltage Shutdown

15.5 VDC

31.0 VDC

15.5 VDC

USB Port

5V, 750 mA

AC Transfer Switch

Transfer Time

< 30 ms

Transfer Relay Rating

16A (resistive load)

AC Input socket IEC-C20

16A max

AC Output socket IEC-C19

16A max

AC Output Front GPO

10A max

Safety and Environmental

Conformance

All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16

EMI / EMC

CE EMC: EN/IEC 62040-2 category C1

Agency Markings

RCM , CE

Operating Temperature

0°C to 40°C

Storage Temperature

-20°C to 60°C

Relative Humidity

5-90% non-condensing

Operating Altitude

Up to 3000 meters above sea level

Weights and Dimensions

Weight

5.9 kg

5.9 kg

7.0 kg

Dimensions (W x L x H)

435x230x115 mm

560x230x115 mm

Warranty

5 Years

Lackey wiring diagram-


Enerdrive EN3DC40+ spec sheet- 


Enerdrive EN3DC40+ manual-

Enerdrive EN1120X spec sheet-


Enerdrive EN1120X manual-


Enerdrive warranty guide-