ENERDRIVE BOARD 40A AC 40A DCDC 2000X EPRO+

ENERDRIVE BOARD 40A AC 40A DCDC 2000X EPRO+

THIS SYSTEM IS DESIGNED FOR THE END USER REQUIRING A HIGH LEVEL OF POWER REQUIREMENTS ALONG WITH AC & DC CHARGING ABILITY • INCLUDES EN31240 AC CHARGER • EN3DC40+ DC-DC CHARGER • EPRO+ BATTERY MONITOR • EN1120S-X 2000W PURE SINE WAVE INVERTER • 5 YEAR WARRANTY


Brand: Enerdrive

Reference No. K-AGM-BOARD-C

0

3,749.00Incl

3,408.18Excl
3749.0AUD
Add to Cart

Enerdrive DIY boards:


Introducing Enerdrives DIY Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more.

Enerdrive have created many different layouts and dimensional sizes to fit nearly every possible application. Designed for the DIY handyman with basic electrical knowledge through to the professional looking to save installation time. From small kits with AC & DC charging and battery monitoring up to kits with 2000w inverters and individual charge/load monitoring.

These kits are all pre-wired by Enerdrive where possible to keep the kits simple to install. All boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application.

Enerdrive also have you covered from a service and support angle with the DIY Installation kits. Designed, constructed and pre-wired by Enerdrive, we know exactly the layout and wiring of your kit so any fault finding or support can be given quickly and concisely. Suits all lead acid battery types and lithium batteries.

*Please note, Enerdrive boards are made to order and can take 2-4 weeks lead time to build upon ordering.

K-AGM-Board-C board includes:


- Enerdrive ePOWER 12V 40A DC to DC battery charger   (EN3DC40+)

- Enerdrive ePOWER 12V 40A AC battery charger (EN31240)

- Enerdrive ePRO PLUS battery monitor (EN55050)

- 3 Stud main negative busbar

- Enerdrive ePOWER 12/24V 40A low battery cutout IP66 (EN-LBC1224-40)

- Main system circuit breaker 120A

- Inverter circuit breaker 200A

- ePOWER DC2DC 60A output fuse connection

- ePOWER AC Charger 50A output fuse connection

- 50A Load output fuse connection

- ePOWER 2000W AC transfer inverter (EN1120S-X)

- Battery restart switch (lithium batteries)

- 12mm Black plastic mounting board. Water & rot resistant


Enerdrive DIY boards overview:

 Items Included                                      K-AGM-Board-C          K-AGM-Board-D           K-AGM-Board-E            K-AGM-Board-F          K-AGM-Board-G          K-DIY-Board-01        
 ePOWER AC 40Amp 230v Charger******
 ePOWER DC2DC 40+ Charger  (Vehicle/Solar) ** *  * *
 ePRO Plus 500A Battery Monitor with  Remote Display 
* *  *
 Simarine Pico LCD WIFI Monitoring Screen * ** 
 Simarine SC301 300A Main Battery Shunt * ** 
 Simarine SCQ25T Individual Load/Charge Module * ** 
 3 Stud Main Negative Bus Bar******
 40A Low Battery Cutout******
 Main System Circuit Breaker 120A******
 Inverter Circuit Breaker 200A*** ***
 Solar Input Positive Circuit Breaker 40A **** 
 ePOWER DC2DC 60A Output Fuse Connection******
 ePOWER AC Charger 50A Output Fuse  Connection******
 1 x 30A Load Output Fuse Connections     *
 2 x 30A Load Output Fuse Connections   ** 
 50A Load Output Fuse Connection*     
 24hr Critical Load 4 Circuit "Wedge" Fuse Block * ** 
 24hr Critical Load 8 Circuit "Wedge" Fuse Block  *   
 Main 6 Circuit "Wedge" Fuse Block with  Negative Bus and Cover     *
 Main 12 Circuit "Wedge" Fuse Block with  Negative Bus and Cover **   
 ePOWER 2000W AC Transfer Inverter with RCD & AC Transfer Switch*  *  
 Battery Restart Switch (Lithium Batteries)***** 
 12mm Black Plastic Mounting Board. Water &  Rot Resistance******
 175A Anderson Plug (Inverter)     *
 50A Anderson Plug (Solar Input)     *
 50A Anderson Plug (Vehicle Input)     *
 Dimensions (L x W x D)1185 x 380 x 130 mm600 x 490 x 100 mm600 x 490 x 100 mm1185 x 380 x 130 mm790 x 380 x 100 mm580 x 580 x 100 mm
 Weight      
 (*) Indicates Standard Fitment      


 

 
 

EN3DC40+

Model

EN3DC40+

Ouput Rating

Output Voltage

12V Nominal (8.0V min)

Output Current (Maximum)

40A – 50A

Output power

775W

Charger DC Output (CH1):

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program

Charger Voltage Range

13.8V – 15.5V

Float Voltage Range

13.0V – 13.8V

Charger Current (User Selectable)

5/10/15/20/25/30/35/40/45/50A (default 40A)

Equalize Voltage (flooded Battery)

15.5V

Equalize Charging Current

10% of Bulk Current Setting

Charging Control

2 stage / 3 stage selectable (Default 3 stage)

DC Output Bank

Single

Current draw from CH1 when in use

= < 50mA

Battery Temperature Setting

Low/ Normal/ High (Battery Temperature Sensor Standard)

Efficiency

95%

Input Rating (CH2 – MPPT Solar)

Input Voltage

14.5 – 45VOC

Maximum Input

≤23 input, 500W (600W allowable) ≥37.5-45V input, 750W (800W allowable)

Input Rating (CH3 – Start/Alternator)

Input Voltage

10.5 – 16VDC / 21 – 32DC

Dimensions

Height x Width x Depth

242mm x 172mm x 74mm

Unit Weight

1.85 Kg

Shipping Weight

2.17 Kg


EN31240-

Model

EN31220

EN31240

EN31260

EN32430

CHARGER OUTPUT

Output Current (Maximum)

20A

40A

60A

30A

OUTPUT VOLTAGE RANGE

Charge

14.2 – 15.5 V

28.4 – 31.0V

Float

13.4 – 13.8 V

26.8 – 27.6V

– Equalize

16.0 V

32.0V

Charging Control

Four stages (Bulk/Absorption/Float/Maintenance)

Two stages (Bulk/Absorption)

Constant Power Supply (Program setting)

Priority Battery Bank Charging

DC Output Bank

Three (1 fully independent, 2 common with diode isolation)

Selectable Battery Type

Gel, AGM, Flooded, Lithium, Program

Standby Current

< 2 mA

CHARGER INPUT

AC Input Voltage (Nominal)

90 to 265 VAC

AC Input Operating Range

207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)

207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)

207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)

207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)

AC Input Frequency Range

47 – 63 Hz

Power Consumption

350W (Full Load)

700W (Full Load)

1050W (Full Load)

1050W (Full Load)

Power Factor Correction

Yes

Charger Efficiency

> 82%

PROTECTION AND FEATURES

Reverse Polarity

Yes, (with user replaceable fuse/s)

Over Charge

Yes, unit shutdown

Over Temperature

Yes, unit de-rated and shutdown

Output Short Circuit

Yes, (with user replaceable fuse/s)

Cooling

Forced air ventilation (thermo controlled fan)

Temperature Setting

Hot, Normal, Cold (no sensor connected)

Battery Temp Sensor Port

RJ12 (standard battery temp. sensor supplied)

DISPLAY

LCD Display (with back light)

Charging status, Battery Voltage, Output Current & Fault Codes.

AC INPUT AND DC OUTPUT CONNECTION

AC Input Connection

IEC with Supplied 1.2M Power Lead

DC Output Connection

Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread

DC Output Ground

Single Heavy Duty Common Ground Stud

ENVIRONMENTAL AND OPERATING TEMPERATURE

Storage Range

-40° to 70° C

Operating Range

-20° to 60° C

Humidity

5-95%, relative humidity non-condensing

Ingress Protection

IP32 (Basic drip proof in vertical orientation)

Base Unit Weight and Dimensions

Weight: (kg)

2.4

2.6

4.0

4.0

Dimension: (mm) L x W x H

295 x 206 x 86

295 x 206 x 86

356 x 206 x 99

356 x 206 x 99

Optional Accessories

Remote Digital Display / Enerdrive Part Number EN3REM

Regulatory Compliance

Complies with AS/NZS 60335.2.29 Including Australian deviations.


EN55050-

Parameter

ePRO Plus

(Part No: EN55050)

Supply voltage range

7..70Vdc

Supply current (@ 12V/ 24V/48V)

10mA / 6mA / 5mA

Input voltage range main battery (+B1)

7..70Vdc

Input voltage range second & third battery (+B2, +B3)

1..70Vdc

Input current range

-600..+600A

Battery capacity range

10..10000Ah

Operating temperature range

-20..+50°C

Storage temperature range

-30..+70°C

Readout resolution

Voltage (0..70V)

± 0.01V

Current (0..10A)

± 0.01A

Current (10..100A)

± 0.1A

Current (100..600A)

± 1A

State of Charge (0..100%)

± 1%

Time remaining (0..24hrs)

± 1min

Time remaining (24..240hrs)

± 1hr

Amphours (0..10000Ah)

± 0.01Ah..10Ah (variable)

Power (0..42kW)

± 0.01W..1kW (variable)

Temperature (-20°C..+50°C)

± 0.5°C

Voltage measurement accuracy

± 0.3%

Current measurement accuracy

± 0.4%

Shunt dimensions:

Footprint

100 x 100mm

Base height

24.0mm

Total height

64.5mm

Weight

290grams

Display dimensions:

Front panel

Ø 64.0mm

Body diameter

Ø 51.5mm

Total depth

36.0mm

Weight

70grams

Protection class

IP20 (CDU front panel only IP65)

Standards

CE certified (EMC Directive 2014/30/EU) including EN50498 Automotive EMC


EN-LBC1224-40-

EN-LBC1224-40

Auto Voltage Detect

12 / 24V

Max Load (shut down current)

40 – 45A

Peak current

120A

Weight

185g

Dimension LxWxH

82mm x 65mm x 41mm


EN1120S-X-

Model – Description

EN1120X

EN1120X-24v

EN1126X

AC Output Power

2000W

2000W

2600W

AC Output Current

8.7A

8.7A

11.3A

AC Output Voltage

230 Vac / 50 Hz

AC Output Waveform

Sinewave (<3% THD)

Nominal DC Input Voltage

12.5 VDC

No Load battery draw

< 1.5 ADC

DC Input Voltage operating range

10.5 – 15.5 VDC

21.0 – 31.0 VDC

10.5 – 15.5 VDC

Under Voltage Alarm

11.0 / 12.1 VDC

22.0 / 24.2 VDC

11.0 / 12.1 VDC

Under Voltage Alarm Recovery

11.3 / 12.3 VDC

22.6 / 24.6 VDC

11.3 / 12.3 VDC

Under Voltage Shutdown

10.5 / 11.8 VDC

21.0 / 23.6 VDC

10.5 / 11.8 VDC

Under Voltage Shutdown Recovery

12.0 / 12.6 VDC

24.0 / 25.2 VDC

12.0 / 12.6 VDC

Over Voltage Shutdown

15.5 VDC

31.0 VDC

15.5 VDC

USB Port

5V, 750 mA

AC Transfer Switch

Transfer Time

< 30 ms

Transfer Relay Rating

16A (resistive load)

AC Input socket IEC-C20

16A max

AC Output socket IEC-C19

16A max

AC Output Front GPO

10A max

Safety and Environmental

Conformance

All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16

EMI / EMC

CE EMC: EN/IEC 62040-2 category C1

Agency Markings

RCM , CE

Operating Temperature

0°C to 40°C

Storage Temperature

-20°C to 60°C

Relative Humidity

5-90% non-condensing

Operating Altitude

Up to 3000 meters above sea level

Weights and Dimensions

Weight

5.9 kg

5.9 kg

7.0 kg

Dimensions (W x L x H)

435x230x115 mm

560x230x115 mm

Warranty

5 Years

Enerdrive K-AGM-BOARD-C wiring diagram-


Enerdrive EN3DC40+ spec sheet- 


Enerdrive EN3DC40+ manual-


Enerdrive warranty guide-


Enerdrive EN31240 spec sheet-


Enerdrive EN31240 manual-


Enerdrive EN31240 installation-


Enerdrive EN55050 Epro+ manual-


Enerdrive EN55050 Epro+ installation guide-


 Enerdrive EN-LBC1224-40 spec sheet-


Enerdrive EN-LBC1224-40 manual-


Enerdrive EN1120S-X spec sheet-


Enerdrive EN1120S-X manual-


Enerdrive warranty guide-