AMI / MIDI 60A FUSE KIT
FUSE KIT CONSISTS OF 2X LMI BUSSMANN FUSE HOLDERS, 4X AMI60 BUSSMANN FUSES & 4X 16-6 COPPER LUGS
Brand: Bussmann
Reference No. 60AFUSEKIT
Bussmann AMI60 Fuse kit:
One of the most common failures with dual battery installations is a failure of the fuse/holder. Poor quality fuse holders often don’t make adequate contact with the fuse which can allow dirt and dust to get in between the contact points. This causes excess heat to be generated due to the high resistance. This excess heat can be enough to melt the fuse and the holder. Even if the fuse holder doesn’t melt, you could be losing valuable charge to heat dissipation. As a result this could cause no charge to your auxiliary battery. This situation is usually diagnosed as a blown fuse however it is more likely attributed to a poor quality fuse holder.
Our fuse kits use the best quality Bussmann fuses and fuse holders designed to fit the cable required for the specified current. We also have circuit breaker kits available in auto & manual reset circuit breakers.
Kit Includes:
- 2x Bussmann LMI fuse holders
- 4x Bussmann 60A AMI fuses (2x spare fuses)
- 4x 16-6 copper crimp lugs (suits up to 16mm2 cable / 6mm stud)
The AMI60 fuse kit is suitable for:
- Redarc BCDC1240
- Redarc BCDC1240D
- Redarc BCDC1250D
- Victron Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC charger
AMI60:
Specifications | |
Amperage | 60A |
Ignition Protected | Yes |
Maximum Voltage | 32V DC |
Interrupt Capacity | 5000A @ 16V DC 2000A @ 32V DC |
Minimum Operating Temperature | -40° C |
Maximum Operating Temperature | 125° C |
Blade Material | Tin-Plated Copper CDA 110/UNS11000 |
Maximum Torque | 40 in-lb (4.52 Nm) |
Weight | 0.05lb (0.02 kg) |
LMI-F-M:
Specifications | |
Brand: | Bussmann |
Model: | LMI-F-M |
Sizing: | One fuse module per AMI fuse; one input module and bus bar required per LMI2-LMI7 assembly. Maximum of 7 modules per assembly |
Ratings: | Maximum total combined rating is 400A continuous. Based on numerous variations between number of poles used, fuses selected, input wiring and output wiring. |
Input module termination: | Stainless steel M8 and keps nut |
Fuse module termination: | Stainless steel M5 and keps nut |
Housing material: | HTN black UL-rated 94V0 termoplastic |
Cover material: | Red EPDM/ santoprene cover for protection from accidental shorts |
Size (mm) LxWxH: | 79x25x31 |
Ambient temperature (°C): | -40 - +85 |
S16-6:
Specifications: | |
Model: | S16-6 |
Cable size: | 16mm2 / 5 B&S / 5 Gauge |
Stud size: | 6mm |
Barrel type: | Bell mouth |
Operating temperature: | -55 to +155°C |
Material: | Tin plated copper alloy |
Dimensions (LxWxH): | 39x11x5.5mm |
