Sand spear with jet tube is designed to extract fresh water out of sand. 1500mm long s/steel tube with jet pipe for easy access to the underground water table.

Flow power pump system in a solid case for easy transport. 12V pump up to 90PSI with nozzle control. 9L per minute flow. Ideal for Marine or RV use.

Electronic pump enhancer is specifically designed to automatically maximise solar pumping performance

Flojet Pump, 12 Vdc, 3.3/15

Flojet Pumps
FEATURES
Pump Body: Polypropylene Body Construction Diaphragm: Santoprene Check Valve: Viton Motor: 12 Volt DC Pump, 12 Vdc, 1.0 Gpm, 35 Psi (max). Psi Pse
APPLICATIONS

Compact automatic demandwater system pump 
Supplies up to 3 fixtures, one or two at a time 
Built-in pressure switch automatically starts and stops pump when faucet is opened and closed 
Self-priming so pump can be located above water tank 
Runs dry for extended periods oftime 
Built-in thermal protector 
Also available without switch for manual application 
IAPMO and CSA listed

Flojet Pumps
FEATURES

Pump Body: Polypropylene Body Construction
Diaphragm: Santoprene Check Valve: Santoprene Motor: 24 Volt DC Pump, 24 Vdc, 3.3/15 APPLICATIONS 
Transfer pump for shower and grey water
Runs dry without damage to the pump
Manual on/off switch or automatic level control may be connected topump (Not provided)
Available in 12 & 24 Volts dc

FLOJET TRIPLEX 2.9 WATER SYSTEM Smooth flow and quiet operation for up to 5 fixtures. Designed to fulfil the water pressure requirements for the majority of recreational vehicles. Smooth flow from 0.7gpm to 2.9gpm (2.6 to 11.0 lpm). Built-in "Pulsation Eliminator" to reduce the cycling and noise. No need for an accumulator tank. Runs dry and self-primes to 9’ (3m). Easy to install and service. 50psi

The Parmax 3 has been designed to serve 3 or more ½” outlets with its 13.2 LPM/40PSI capacity. Supplied with ½” BSP male and barbed snap in ports. Quad diaphragm supplies steady flow water flow and quiet operation. Pressure switch cut in 20 PSI cut out 40 PSI. Self primes to 3 metres. Can be run dry for extended periods. Thermal overload. Ignition protected. Quad diaphragm provides quiet operation. Will not taint drinking water.

The parmax 3 has been designed to serve 3 or more ½” outlets with its 13.2 LPM/40PSI capacity. Supplied with ½” BSP male and barbed snap in ports. Quad diaphragm supplies steady flow water flow and quiet operation. Pressure switch cut in 20 PSI cut out 40 PSI. Self primes to 3 metres. Can be run dry for extended periods. Thermal overload. Ignition protected. Quad diaphragm provides quiet operation. Will not taint drinking water.

PAR-Max 4 31620 Series Water Pressure System Pump Flow rate: 16.3 Litres/min (4.3 gallons/min) Self-priming from dry up to 2.4m (7.8ft) Features: • Smooth flow • Dry running capability • Soft noise absorbing mounts • Snap-fit port fittings • Corrosion resistant materials • Meets USCG Regulation 183.410 and ISO 8846 MARINE (ignition protection) • Meets EN 50081-1 Electro-magnetic Compatibility Specifications: Body - Glass Filled Polypropylene Diaphragm - Santoprene Valves - EPDM Port Type - 1/2" (13mm) Hose barb or Thread Voltage - 12Vdc Motor - Thermal overload protection Weight - 2.8 kg 6 lb

PAR-Max 4 31620 Series Water Pressure System Pump Flow rate: 16.3 Litres/min (4.3 gallons/min) Self-priming from dry up to 2.4m (7.8ft) Features: • Smooth flow • Dry running capability • Soft noise absorbing mounts • Snap-fit port fittings • Corrosion resistant materials • Meets USCG Regulation 183.410 and ISO 8846 MARINE (ignition protection) • Meets EN 50081-1 Electro-magnetic Compatibility Specifications: Body - Glass Filled Polypropylene Diaphragm - Santoprene Valves - EPDM Port Type - 1/2" (13mm) Hose barb or Thread Voltage - 24Vdc Motor - Thermal overload protection Weight - 2.8 kg 6 lb